Archive | Uncategorized RSS feed for this section


Looking for a unique gift for the homebrewer on your list?  How about some local malt to brew with?

We just dropped off a fresh batch of malt at 2 Asheville homebrew shops.  Please check out Asheville Brewers Supply on Merrimon Avenue or Fifth Season on Banks Avenue (downtown).  Both of these shops can tell you all you need to know about working with our 6-row barley.

Just our way of helping you get into the Christmas spirits!

Happy Holidays from your friends at Riverbend.



Last week I got a phone call from the good folks at the Blue Ridge Distilling Company based in Golden Valley, North Carolina.  We started talking about local grain production, craft distilling, and the challenges of running a small business.  By the time the conversation was over, we were both excited about the idea of producing local spirits, and I made plans to visit their facility the following day.  I also realized that I had a fair bit of googling to do!

While the differences between bourbon, whiskey, and rye might be “old hat” to most folks in this part of the country….there is a new wave of craft distillers that are exploring new recipes, ingredients, and production methods.  For example, Blue Ridge is planning to produce a “single malt” vodka, crafted with 100% malted barley (as opposed to a blend of corn, wheat, or potatoes).

I arrived late the following afternoon to discover a newly constructed barn with close to 100 acres of prime farmland wrapped around it.  While I’ve seen plenty of high-end brewing equipment, I must say this was my first glance at a modern distillery, and it was pretty impressive!  The picture below shows a “hybrid” system that allows for traditional pot stilling techniques in the center vessel or multi-chambered distillation through the column on the left.  The bulbous feature on the pot still is referred to as the whiskey helmet.  This design element provides more surface area during the distillation process, resulting in a smoother tasting finished product.



Blue Ridge Distilling's pot still & distillation column

Tim at Blue Ridge and his team brought me up to speed on their plans to produce vodka, gin, whiskey, and an array of brandies.  Turns out, they have been developing this business for almost two years and are eager to begin distilling and packaging in early 2012!

Following our meeting, we sent them home with 100 lb. of our heritage malt to conduct some testing.  Who knows, local vodka could be just around the corner!

As for the whiskey, we will have to be patient….extremely patient….it has to age a minimum of 3 years.  Call Blue Ridge to reserve your own barrel now!




This weekend we are headed to the Raleigh/Durham area for the 2011 Sustainable Agriculture Conference that is hosted by our friends at Carolina Farm Stewardship Association.  They have compiled an amazing line-up of foodies, farmers, and permaculture professionals for several days of workshops and presentations.

But you know what we are really stoked about?…..the first batches of brew from Weeping Radish using Riverbend malts will be featured this weekend!!

Uli (owner of Weeping Radish) will be bringing along a sneak peak of their seasonal Doppelbock.  Keep an eye out for this one in December, they are planning to release a limited number of bottles and kegs throughout the state.

Riverbend will also be part of a roundtable discussion on small grains with Sean Wilson from Fullsteam, Ben Haynes from Looking Back Farms (our wheat grower), and Jennifer Lapidus of Carolina Ground, L3C.  We’ll be covering the full spectrum of the process from the seed to the fermenter….should be fun…not as much fun as drinking beer, but fun.

Stayed tuned for more new beer release information in the weeks ahead…word is getting out!






I spent most of last Wednesday in our Sprinter van…running the gauntlet of I-40 for close to 500 miles.

I met with our buddy Uli Bennowitz, from the Weeping Radish Brewery, by the side of the road and dropped off our first shipment of malt!  Weeping Radish is located near Manteo and focuses primarily on German styles.  Although their beer is not currently available in WNC, they are expanding their distribution channels and offer shipping services on their website, if you are interested.  Some people around Asheville may not realize it, but Uli was responsible for “legalizing” the first microbrewery in North Carolina almost 25 years ago.  He has since branched off into an array of new business ventures focusing on locally grown, sustainable meat and produce.  If you are planning a trip to the Outer Banks…check ’em out.

After our brief meeting, I headed for Fullsteam in Durham.  These guys are pioneers in their own right….anyone who can make beer out of red beans and rice or kudzu deserves some attention.   They have been a big supporter of our project since its infancy, and we really appreciate the support.  They are planning to run some test batches using our Heritage Malt and Carolina Rye next week.  Maybe a nice spicy rye IPA release before Thanksgiving???  I’ll also take this opportunity to make a shameless plea for the bottling or re-release of the Cheerwine Saison…

Learn more about their “plow to pint” approach to brewing at

My final stop was the riverside “happening hamlet” of Saxapahaw.  I met with Ben, the proprietor of Haw River Farmhouse Ales, to discuss their new brewery slated to open sometime next year.  We kicked around a lot of different ideas on how to build the beer economy in our state…agritourism, local sourcing of ingredients, and building relationships with farmers in every region.

Follow their progress at

I arrived home sublimely exhausted…knowing that NC’s beer scene will continue to develop into a vibrant and durable part of our economy.  Who knows?  Maybe a southern style ale, saison, or hefeweizen is closer than we think.


Riverbend Malt House in Mountain Xpress!

Great article on Riverbend Malt in Mountain Xpress



Last week was a whirlwind….final inspections (which we passed), grain deliveries, and a successful kiln test!!!  A wild ride to say the least.  We capped off the week by starting our first batch.  We have chosen to begin at 50% capacity…just until we get things “wired”.  I also envision it will take us awhile to figure out the bag sewer…nothing like the thrill of holding a high-powered needle gun next to your fingers!

The weeks ahead will be packed with preparations for a busy Oktoberfest season.  We are entering a Belgian Wit recipe in homebrew contests at both the Kingsport, TN and Charlotte Oktoberfest events.  This beer was made using 100% locally grown Appalachian White Wheat and Thoroughbred barley. Hope it fares well with the participants and judges at these events.  I’m also planning a Rye IPA for one of the after parties.  This one will be our first brew with the rye we picked up last month…should be fun.

We will also be speaking at Beer University during the Kingsport event….a full 30 minute presentation on malting science and global beer market trends!

For more information on the Kingsport event click here.

For more information on the Charlotte event click here.


Loading our first batch into the steep tank!





Word is getting out about Riverbend and we are fielding calls from interested farmers across the state!  In the past few weeks we have spoken to farmers in Granville County (near Kerr Lake) and Polk County who are interested in growing grain for us during the 2011-12 season.

Since Polk County is just an hour south of Asheville, I scheduled a visit to meet the farmer (Bruce Edwards) and “talk shop” in his driveway.  His directions led me to the beautiful community of Greens Creek near Columbus.  This area is a mosaic of small family-run farms and dairy operations set against the backdrop of the Appalachian mountains.

The view from Greens Creek....


Bruce had done his homework, this grain had been tested for disease, germination, and kernel weight….all the of the information we need to make our purchasing decisions.  As we spoke, he told me about his experience growing wheat and rye in this region, including many of the challenges that he faced with regards to market fluctuations, rising fuel costs, and changing regulations.  I offered to send him some information on the organic certification cost-share programs as well as some the specifications we will be looking for from the 2011-2012 harvest.

I started malting the rye that evening as I was eager see how it would perform.  I followed the same steeping and temperature regime that we applied to our barley and wheat trials over the next few days.  The grain chitted within 24 hours and went through the remaining stages without any surprises.  Take a look….


Abruzzi rye...fresh from the kiln!

We hope to have this product available sometime in late October…stay tuned for information on pricing and availability.


I know you’re all asking yourselves….what is taking so long?  Trust us, we are right there with you.  Since our return from Canada (and even during) we have worked with our contractors, city inspectors, and spent countless hours searching for equipment on the interwebs.  Along the way we’ve experience the normal cost overruns, scheduling conflicts, and logistical headaches that plague most businesses during their initial start-up….but I’m proud to say we are well on our way!

Construction of the kiln (aka drying room) has been the big challenge….Anytime you put a lot of heat into an enclosed space, you raise the eyebrows of city inspectors, licensed professionals, and sub-contractors.  This has required us to spend extra time to ensure that we meet all applicable building codes and address all safety concerns.  This is a good thing….at the end of the day we want to bring people in, show them around and have everyone feel comfortable with what we are doing.

Our kiln...constructed of recycled panels from an old Winn-Dixie butcher shop

The other pieces of the malt house puzzle are also coming together.  We found a great deal on some stainless steel tanks that we will use for steeping.  A small-scale seed cleaner and debearder are also on their way to us from Illinois.  The guys up there at Commodity Traders really came through for us…they recondition these machines to better than new condition and were extremely knowledgable about all aspects of the grain cleaning process.

Our two steep tanks...each will hold about 1,000 pounds of grain

Next week we will be completing the kiln and hopefully installing the duct work.  Production could begin by late August if all goes well.  Stay tuned for more updates!


Greetings from Winnipeg! Brent and I just completed our second week of malt training at the Canadian Malt Barley Technical Centre ( Our typical day starts with 3-4 hours of lecture in the morning, followed by “hands-on” work in the malt house or lab  in the afternoon. The lectures have covered everything from the biochemistry of malting to world market conditions. These lectures have been presented by a variety of staff members who have decades of experience in the field of large-scale malting and brewing operations.

Brian checks out a fresh batch of 2-row malt

In addition to the lectures, CMBTC has also performed a comprehensive malt analysis on several samples we brought from North Carolina. While I won’t bore you with the specifics, the take home message is encouraging….our 6-row barley is comparable to commercially available varieties!

Whats next you ask?….We’ve got 1 more week of training where we tie the finished malt to brewing process. This will give us the tools we need to work with our clients to produce high-quality craft beer. We will also tour a large commercial malt house that produces 90,000 tons of malt a year!

After that we’ll be back in Asheville to resume construction at the malt house.  Maybe we can get together for pint, eh? (Sorry, couldn’t resist using the other Canadian language joke)